I have been talking about systemd in a container for a long time. Way back in 2014, I wrote “Running systemd within a Docker Container.” And, a couple of years later, I wrote another article, “Running systemd in a non-privileged container,” explaining how things hadn’t gotten much better. In that article, I stated, “Sadly, two years later if you google Docker systemd, this is still the article people see—it’s time for an update.” I also linked to a talk about how upstream Docker and upstream systemd would not compromise. In this article, I'll look at the progress that's been made and how Podman can help.
There are lots of reasons to run systemd inside a system, such as:
- Multiservice containers—Lots of people want to take existing multi-service applications out of VMs and run them inside of containers. We would prefer that they break apart these applications into microservices, but some people can’t or don’t have time yet. So running them as services launched out of unit files by systemd makes sense.
- Systemd unit files—Most applications that run inside of containers are built from code that was run in VMs or on host systems. These applications have a unit file that was written for the application and understands how to run the application. It can be better to launch the service via the supported method, rather than to hack up your own init service.
- Systemd is a process manager—It handles the management of services like reaping, restarting, and shutting down better than any other tool.
That being said, there are also lots of reasons not to run systemd in containers. The main one is that systemd/journald controls the output of containers, whereas tools like Kubernetes and OpenShift expect the containers to log directly to stdout and stderr. So, if you are going to manage your containers via Orchestrator like these, then you should think twice about using systemd-based containers. Additionally, the upstream community of Docker and Moby were often hostile to the use of systemd in a container.
I am happy to say things have gotten better. My team, container runtimes, at Red Hat decided to build our own container engine, called Podman. Podman is a container engine with the same command-line interface (CLI) as Docker. Pretty much every command you can run from the Docker command line you can execute with Podman. I often give a talk now called Replacing Docker with Podman, where the first slide says
And lots of people had.
With Podman, however, we were not hostile to systemd-based containers. Systemd is the most prevalent Linux init system on the planet, and not allowing it to run properly within a container would ignore the way thousands of users choose to run containers.
Podman understands what systemd needs to do to run in a container. It requires things like tmpfs mounted at /run and /tmp. It likes to have the “container” environment turned on, and it expects to be able to write to its portion of the cgroup directory and to the /var/log/journald directory.
When Podman starts a container that is running init or systemd as its initial command, Podman automatically sets up the tmpfs and Cgroups for systemd to start without a problem. If you want to block the systemd behavior, you have to run
--systemd=false. Note that the systemd behavior only happens when Podman sees the command to be executed is systemd or init.
Here is the man page description:
man podman run
Run container in systemd mode. The default is true.
If the command you running inside of the container is systemd or init, podman will setup tmpfs mount points in the following directories:
/run, /run/lock, /tmp, /sys/fs/cgroup/systemd, /var/lib/journal
It will also set the default stop signal to SIGRTMIN+3.
This allows systemd to run in a confined container without any modifications.
Note: On SELinux systems, systemd attempts to write to the cgroup file system. Containers writing to the cgroup file system are denied by default. The container_manage_cgroup boolean must be enabled for this to be allowed on an SELinux separated system.
setsebool -P container_manage_cgroup true
Now let’s look at a Dockerfile for running systemd in a container using Podman:
# cat Dockerfile FROM fedora RUN dnf -y install httpd; dnf clean all; systemctl enable httpd EXPOSE 80 CMD [ "/sbin/init" ]
Build the container
# podman build -t systemd .
Tell SELinux it is ok to allow systemd to manipulate its Cgroups configuration.
# setsebool -P container_manage_cgroup true
You will forget to do this; I did while writing this blog. Luckily, you do this once, and it will be set for the lifetime of the system.
Now just run the container.
# podman run -ti -p 80:80 systemd systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) Detected virtualization container-other. Detected architecture x86-64. Welcome to Fedora 29 (Container Image)! Set hostname to <1b51b684bc99>. Failed to install release agent, ignoring: Read-only file system File /usr/lib/systemd/system/systemd-journald.service:26 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Slices. … [ OK ] Started The Apache HTTP Server.
And the service is up and running.
$ curl localhost <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> … </html>
Note: Don’t try this with Docker you still need to jump through hoops to get a container like this running in the daemon. (You need additional fields and packages, to make this work seamlessly in Docker, or run in a --privileged container. My previous article explains this better.)
Other cool features about Podman and systemd
Podman in systemd unit files works better than Docker
When launching containers at boot, you can simply put Podman commands into a systemd unit file, and systemd will launch and monitor the service. Podman is a standard fork and exec model. That means the container processes are children of the Podman process, so systemd has an easy time monitoring the processes.
Docker is a client service model and putting the Docker CLI into a unit file is possible. However, as the Docker client connects to the Docker daemon, the Docker client becomes just another process handling stdin and stdout. Systemd has no idea of this relationship between the Docker client and the container that is running under the Docker daemon and can't monitor the service in this model.
Systemd socket activation
Podman works correctly when the socket is activated. Because Podman is a fork/exec model, it can pass the connected socket down to its children container processes. Docker cannot do this because of the client/server model.
Podman varlink, a service that Podman uses for remote clients to interact with containers, is actually socket activated. The cockpit-podman package, written in Node.js, is part of the cockpit project and allows people to interact with Podman containers via a web interface. The web daemon running cockpit-podman sends messages to a varlink socket that systemd is listening on. Systemd then activates the Podman program to receive the messages and start managing containers. Systemd socket activation allows us to have no long-running daemon and still be able to handle a remote API.
We are developing another client for Podman, called podman-remote, which implements the same Podman CLI but calls into varlink to launch containers. Podman-remote can work over SSH sessions, allowing us to securely interact with containers on different machines. We eventually plan on using podman-remote to support MacOS and Windows users as well as Linux users. This will allow developers on a Mac or Windows box to launch a Linux VM with Podman varlink running and have the feeling that containers are running on their local machine.
Systemd has the ability to hold up secondary services from starting that rely on a containerized service starting. Podman can pass down the SD_NOTIFY Socket to the containerized service, so it can notify systemd when it is ready to begin servicing requests. Docker again cannot do this, because of the client/server model.
We have plans to add a
podman generate systemd CONTAINERID, which would generate a systemd unit file for managing the specified container. This should work in either root or rootless mode for non-privileged containers. I have even seen a PR to create a systemd-nspawn OCI-compliant runtime.
Running systemd in a container is a reasonable thing to do. Finally, we have a container runtime in Podman that is not hostile to running systemd fully but easily enables the workload.Last updated: November 5, 2021